Automatic engine oil filling machine, here is the manufacturer
How to clean and maintain the engine oil filling machine? Let me make a short explanation
1.Replace the exhaust filter on the engine oil filling machine in time. Once the vacuum
pump temperature is significantly increased, the motor current reaches or exceeds the
rated current, and there is soot in the pump exhaust port. Insert the exhaust filter to check
for blockage. If it is blocked, replace it with new ones. In addition, an exhaust pressure
gauge is installed at the pump filling hole of the vacuum machine to check whether the
filter is clogged. Once the pressure exceeds 0.6 Pa, replace the exhaust filter.
2.Clean the valve flap of the engine oil filling machine. When the nozzle of the oil filling
machine leaks, clean the valve flap in the nozzle with the cleaning liquid and blow it off
with an air compressor to ensure that the nozzle is clean and flat.
3.To clean the suction filter of the engine oil filling machine, the suction filter should be
kept clean and the suction filter is a filter to prevent large particles of impurities.
4.The main operation steps are: after stopping the pump, unscrew the nozzle connector
from the nozzle, loosen the four screws on the nozzle, take out the suction filter in the
nozzle, put it into the cleaning solution, and then dry it. , wipe the nozzle flat, install the
suction filter into the nozzle, and tighten the nozzle with four screws.
Subscribe To Our Mailing List